Operating & maintenance manual 10.1.2 Override function: Rear axle (optional feature) If your wheel loader is equipped with the Heavy-Duty (HD) system for the rear axle drive, you can activate this system when driving on slopes or on slippery grounds. In order to do so, set the switch “HD system rear axle” ( 5 ) to the desired stage. Toggle switch pressed down at the front: 1 st stage, low traction (standard function, driving mode) Toggle switch pressed down at the rear: 2 nd stage, high traction (on slopes or heavy grounds) The corresponding light ( 6 ) on the display lights up. At the second stage, the rear tires are set to the max. driving torque. 6 5 Fig. 57 Override function:
5HDUD[OH 56 WARNING Danger due to insufficient stability and lack of propulsion If, even with the override function activated, the required thrust cannot be established, do not continue operation on the slope in question and back up.