hyundai — AW1110-AW1140 EN 05 20 1.0

Operating & maintenance manual 10 Driving on heavy soils and on slopes 10.1 Optional automatic traction control You can use the optional automatic hydraulic traction control to drive the compaction roller on level grounds or on slopes, either with or without vibration. 10.1.1 Override function: Drum (optional feature) In certain situations, e.g. when starting the compaction roller with the rear wheels or the drum sunk into the ground or while driving at a carefully set speed or for driving on slopes, it may be necessary to override the HA control. In order to do so, actuate the switch “Override function Drum” ( 3 ), which deactivates the automatic traction control of the drum.

Toggle switch pressed down at the rear: automatic traction control off. The corresponding light ( 4 ) on the display lights up. The maximum driving torque is established at the roller drum. 3 This function is available for the Heavy Duty (HD) system only. 4 With the standard drive of the roller drum, the driving torque is not controlled. Switching to an increased driving torque of the drum is possible. In order to do so, actuate the switch ( 3 ). Fig. 56 Override function: Drum 55 NOTICE The optional automatic hydraulic traction control reduces spinning of the drum when driving on slopes or in heavy terrain.

WARNING Danger due to insufficient stability and lack of propulsion If, even with the override function activated, the required thrust cannot be established, do not continue operation on the slope in question and back up.