Operating & maintenance manual 9.6 Stopping and parking the compaction roller Stopping the Diesel engine: x Stop the compaction roller on solid and level ground. x In order to stop the compaction roller, set the joystick ( 4 ) to the neutral (middle) position. x Use the green button ( 7 ) to set the diesel engine speed to idling. Actuate the switch ( 1 ) to apply the parking brake. The corresponding symbol lights up on the dashboard. x Turn the ignition key counterclockwise into the neutral position and remove it from the ignition lock ( 2 ). x Press the locking button in the right armrest and move it to the rear position in order to get off the vehicle. x Move the steering column forward.
2 1 2 1 Fig. 54 Parking the compaction roller 9.6.1 Turning off the battery main switch (optional feature) In case your machine is equipped with a battery main switch, after stopping the diesel engine, wait for a minimum of 100 seconds before pulling out the ignition key and switching off the battery main switch. 9.6.2 Leaving the compaction roller Enclosed cab: 14 After leaving the cab, lock the door ( 13 ) and the engine hood ( 14 ). In addition, use wheel chocks to secure the compaction roller against rolling. Canopy: 13 After leaving the operator’s station, lock the engine hood ( 14 ). In addition, use wheel chocks to secure the compaction roller against rolling. 14 Fig.
55 Leaving the compaction roller 54 NOTICE Never shut off the Diesel engine while it is running at a high engine speed. Let the Diesel engine idle until a temperature compensation has been established. SAFETY INSTRUCTIONS Obligation to inform yourself! If you intend to park the compaction roller in areas that are part of public road traffic, be sure to observe the applicable regulations, safety guidelines and laws.