hyundai — AW1110-AW1140 EN 05 20 1.0

Operating & maintenance manual 12 Towing the compaction roller 12.1 Safety instructions referring to the towing process 12.2 Measures to be taken prior to towing Put wheel chocks under the rear wheels and the drum! Fig. 64 Danger of rolling 60 WARNING Precautionary measures for towing! The towing preparations and the towing process itself may only be carried out by experienced and skilled persons who have undergone the specific training required for these measures. Make sure the towing vehicle disposes of the required tractive force. The total weight of the compaction roller needs to be taken into account, see chapter Technical specifications. WARNING Towing distance!

The compaction roller may only be towed within the working zone. The towing distance is to be kept as short as possible and may not exceed 500 meters (546 yards)! NOTICE Material damage x Before starting the towing process, make sure that the required preparations at the driving hydraulics and the parking brake have been completed. x Set the towing vehicle in motion very slowly. x Maximum towing speed: 1 km/h (0.6 mph). DANGER Risk of death! Use the wheel chocks to prevent the compaction roller from rolling, since there is no braking effect after releasing the parking brake and the HP valves!

If the compaction roller is parked on a slope and needs to be towed, make sure that the rear wheels and the drum are adequately secured!