hyundai — AW1110-AW1140 EN 05 20 1.0

Operating & maintenance manual 13 Working with the compaction roller 13.1 Control elements related to working The functions related to working with the compaction roller are controlled by means of the joystick ( 1 ) and the switch for selecting the type of vibration ( 2 ) on the panel of switches next to the joystick. Use the joystick to select the desired direction of motion. Different colors serve to identify the functions of the ergonomically arranged buttons:

Green = idle mode of the Diesel engine ( 3 ) Blue = driving without working ( 4 ) Red = driving & working ( 6 ) Yellow = ECO speed ( 5 , optional feature*) *If this feature is not available, the button serves to reduce the diesel engine speed (working is not possible in this mode) Depending on the Diesel engine, buttons 3 - 6 may not be present. In this case, to work with vibration, set the rotational speed of the diesel engine to the max. by means of the hand gas lever. 1 . Use the button on the front of the joystick ( 7 ) to turn the vibration on or off. 2 . Use the selector switch ( 2 ) to set the vibration type: Fig. 70 Control elements 3. Select the operating mode ( 8 ):

64 SAFETY Obligation to inform yourself! • Inform yourself of all issues related to operating the compaction roller. • Read the safety instructions before starting the compaction roller. In addition to this, be sure to observe all laws concerning the operation of earth-moving construction machines. • In case of doubt, contact your Hyundai dealer. INSTRUCTIONS DANGER Risk of death! x Using the attachment to transport, lift or lower people is strictly prohibited! x Make sure other individuals at the construction site keep off the operating range of the compaction roller! x Secure the work zone against unauthorized trespassing.

x Before and while driving backwards, check the area behind you by looking backwards. Vibration type, soil compaction Ɣ Middle position (0): Vibration off Ɣ Front pressed down (KA): Surface compaction / low amplitude Ɣ Rear pressed down (GA) Deep compaction / high amplitude Operating modes Ɣ Turtle: Front of the switch pressed down, low speed Ɣ Rabbit: Rear of the switch pressed down, high speed