Operating & maintenance manual 13.3.2 Stopping the surface soil compaction x To stop the surface compaction process, push the button Vibration on / off ( 2 ) again. x The vibration is deactivated. x If you had chosen automatic actuation via the vibration control switch ( 6 ), the vibration stops automatically as soon as the speed of the compaction roller decreases. The symbol for low amplitude stars to flash. x However, the previously selected type of vibration remains preselected. x In order to stop the compaction roller, move the joystick ( 1 ) back to the neutral (middle) position.
x Set the Diesel engine to idle speed by pushing the green button ( 4 ) on the joystick or actuating the hand gas lever. x Apply the parking brake ( 5 ). The symbol on the display lights up. Fig. 74 Stopping surface soil compaction 68 DANGER In any emergency which requires you to stop the compaction roller at once, press the emergency stop push-button (5).