hyundai — AW1110-AW1140 EN 05 20 1.0

Operating & maintenance manual 13.3 Soil compaction by means of the smooth roller drum 13.3.1 Surface soil compaction x Start operating the compaction roller, as described in the preceding section. x Select the “turtle” operating mode (3) to set a low driving speed (front of the switch pressed down). x Choose the rotational speed for the diesel engine to operate the roller drum by means of the buttons on the joystick ( 1 ) or the hand gas lever (depending on the type of compaction roller). x Set the selector switch for the type of vibration to low amplitude (front of the switch pressed down). x The symbol for low amplitude lights up on the display.

x Move the joystick ( 1 ) forward or backward, depending on the desired direction of motion. x The symbol indicating the direction of motion lights up on the dashboard. x If you have chosen manual actuation via the vibration control switch ( 5 ), turn the vibration on or off by pushing button 2 on the joystick ( 1 ). OR: x Choose automatic vibration control via the vibration control switch ( 5 ) and push button 2 . The symbol for low amplitude starts flashing, and the vibration is automatically initiated, as set via the selector switch ( 4 ), as soon as the compaction roller has reached a certain driving speed. x If this is the case, the symbol for the low amplitude lights up.

x Below this speed, vibration stops again and is started anew as soon as the respective speed is reached again. x The compaction roller starts to move in the desired direction of motion and performs surface soil compaction. Fig. 73 Surface soil compaction 67 NOTICE Measures to be taken prior to driving The compaction roller needs to be ready for operation with the Diesel engine started and running at operating temperature (see Starting, driving and stopping the compaction roller). SAFETY Obligation to inform yourself! For surface compaction on slopes, see Driving on heavy soils and on slopes. INSTRUCTIONS