Operating & maintenance manual 14 Compaction measurement (optional feature) If your compaction roller is equipped with a compaction measurement device (optional feature), the oscillation and acceleration of the drum are measured. The respective values are established by a sensor ( 1, see photo below) and forwarded to a computer. The computer transfers the values to a display ( 2 ) in the cab. The representation on the display enables the driver to inform him-/herself of the current values concerning the degree of compaction and vibration at all times. 14.1 Variants of the compaction measurement system The system is available in several optional variants:
x Analog display x Track monitor with optional printer x CompDoc with LCD display of the compaction data and storage function for subsequent evaluation or printouts 14.1.1 Advantages of compaction measurement x The information retrieved by the compaction measurement system ( 2 ) enables the driver to better assess (and possibly reduce) the amount of passes required to attain a certain result in a specific environment. x Thus, time and fuel can be saved as well as unnecessary wear and tear avoided. x The compaction results are not worsened by carrying out more passes than required any more.
x Potential problems due to certain characteristics of the soil or the material are detected and adequate measures can be taken to prevent them. x The compaction roller may be operated in locations where area-wide compaction measurement for construction work is mandatory. 1 2 Fig. 78 Compaction measurement 71 NOTICE x The compaction measurement system establishes values and provides information on the degree of compaction. x It does not interfere with the operational processes of the compaction roller.