hyundai — AW1110-AW1140 EN 05 20 1.0

Operating & maintenance manual 14.2 Analog display An easy-to-install measurement system which serves to inform the driver of the degree of soil compaction. The compaction of the soil is continuously measured by an acceleration measurement device. If the degree of compaction increases, the acceleration of the drum is increased, which, in turn, causes the values on the instrument to increase as well. As soon as the maximum compaction capacity of your vehicle has been reached, the maximum degree of compaction is set as a fixed value. The process of compacting the soil can then be terminated. In case no solid value can be established, an analysis of the roadbed is required. Fig.

79 Analog display x Identifying weak points Even for the first compaction pass, the value indicates if the soil is suitable for compaction or not. x Avoiding unnecessary compaction cycles The progress and the completion of the compaction work is visualized: The driver keeps on compacting the soil until the value does not rise any more. x Preventing excessive compaction The “Jump” light warns of grain crushing and damage to the machine. The following parameters are displayed: The relative degree of compaction The more the soil is compacted, the higher the respective value. The frequency Displays the current frequency of the vibration drive as a numerical value in Hertz [Hz].

• Jump Operation on soil which has been compacted too much can cause the vehicle to jump. 72