hyundai — AW1110-AW1140 EN 05 20 1.0

Operating & maintenance manual 14.4.1 Installing and dismantling the compaction measurement system Installing and dismantling the compaction measurement system in the cab is easy. Removing it from the cab after each operation prevents the device from being stolen or damaged. Attach/ remove the protecting caps of the plug-in connections. Screw on/off the plug-in connections ( 3 ) of the compaction measurement system. Make sure the mounting brackets ( 4 ) click into place. / Unlock the mounting brackets Remove the compaction measurement system from the mounting. 2 3 Fig.

82 Compaction measurement 14.5 Compaction measurement system with dynamic compaction control Not only does the “comprehensive dynamic compaction control“ with data storage display the current vibration data, but it also saves any compaction information recorded since the activation of the device. x The information can be transferred to any PC and analyzed with suitable software. x Detailed technical support is thus provided for the compaction work. 74 Fig.

83 Compaction measurement system with dynamic compaction control NOTICE From an economic point of view, the most relevant advantages of compaction measurement with storage function are quality enhancement of the operation as a result of controlled compaction and the comprehensible documentation of the compaction results both for the building contractor and the client. NOTICE For details regarding settings, step-by-step instructions, recording and storage as well as for the subsequent analysis of the compaction data, see the operating manual of the manufacturer of the compaction measurement system.