Operating & maintenance manual 20.2 Maintenance certificate A: Daily checks and procedures 20.2.1 Cleaning and inspecting the compaction roller Prior to any operation of the compaction roller: 1. Conduct a visual inspection to check the exterior of the compaction roller. Clean it, if necessary. 2. Check the hydraulic components and the hoses for leakage. 3. Check the distance of the scrapers to the drum. 4. Check the scrapers for damage. 5. Remove coarse dirt from the roller drum and the scrapers. 6. Watch out for damage at the vehicle and eliminate it, if necessary. Fig.
101 Daily check V 20.2.2 Checking the Diesel fuel level 3 Diesel Prior to any operation of the compaction roller, check the Diesel fuel level ( 1 ) on the display. 2 x If necessary, top up on Diesel via the fuel filler neck ( 3 ). 1 Fig. 102 Diesel fuel level 20.2.3 Checking the AdBlue ® / DEF level (applies to emission stage EU4 and EU5 machines only) 1. Prior to any operation of the compaction roller, check the AdBlue ® / DEF level ( 2 ) on the display. 2. If necessary, top up on a sufficient amount of NOx reduction additive /urea-water solution via the AdBlue ® / DEF filler neck ( 4 ). 2 2 AdBlue ® / DEF 4 Fig. 103 AdBlue ® / DEF level 88 NOTIC Risk of damage to the machine!
E Be sure not to mix up the two filler necks (Diesel and AdBlue® / DEF)! If you are unsure, please refer to the chapter on Refueling in this manual. NOTIC Risk of damage to the machine! E Be sure not to mix up the two filler necks (Diesel and AdBlue® / DEF)! If you are unsure, please refer to the chapter on Refueling in this manual.