hyundai — AW1110-AW1140 EN 05 20 1.0

Operating & maintenance manual 20.2.4 Water-fuel separator Prior to any operation of the compaction roller, check the fuel-water separator: The water-fuel separator ( 1 ) is to be found at the stiffener wall to the cab (right, in the direction of motion). 1. Open the cover ( 1 ) of the ventilation grills. 2. Check the water-fuel separator. 3. Drain the water-fuel separator ( 1 ) by means of the drain plug. 1 Fig. 104 Water-fuel separator 20.2.5 Coolant level Prior to any operation of the compaction roller: 1. Check the coolant level. 2. Open the cover of the ventilation grill ( 3 ) and twist off the lid of the combination cooler. 3. Check the coolant level. 4. Add coolant, if required. 5.

Ascertain the correct mixing ratio of the coolant: o Capacity of the cooling system: approx.15 liters (4 gallons). o Adhere to the following mixing ratio: 60% water : 40% coolant & for example, mix 0.6 ltr (20.2 oz) of water with 0.4 ltr (13.5 oz) of coolant) Fig. 105 Coolant level 89 WARNING Risk of burns and scalding caused by hot coolant Make sure the engine has cooled down before you open the lid.