Operating & maintenance manual 20.2.6 V-belt tension Prior to any operation of the compaction roller, check the V-belt tension and check the V-belt for damage. (Note that the illustration only serves as a generic example. It can differ from the engine installed in your compaction roller). Fig. 106 V-belt tension 20.2.7 Engine oil level Prior to any operation of the compaction roller: 2 1 1. Check the engine oil level of the Diesel engine at the oil dipstick ( 1 ). 2. If necessary, use the filler neck to add engine oil. 3. Unscrew the lid ( 2 ) of the filler neck. 4. Carefully fill in engine oil. 5. After adding oil, screw the lid ( 2 ) back on.
(Note that the illustration only serves as a generic example. It can differ from the engine installed in your compaction roller). Fig. 107 Engine oil level 90 WARNING Risk of burns and scalding caused by rotating parts • The V-belt tension may only be checked with the Diesel engine stopped. • Turn off the Diesel engine and remove the ignition key. SAFETY Obligation to inform yourself! For information on tensioning and replacing the V-belt, see the service manual of the Diesel engine manufacturer, which is included in the scope of delivery of the compaction roller. INSTRUCTIONS SAFETY Obligation to inform yourself!
• Pay attention to the information on the engine oil to be used in the engine compartment. • If no information is displayed in the engine compartment, consult the Table of lubricants for the required specifications. INSTRUCTIONS NOTICE Material damage In order to prevent damage to the Diesel engine, never mix different types of oil.