Operating & maintenance manual 20.2.8 Hydraulic oil level Prior to any operation of the compation roller: 1. Unscrew the filler neck with the oil dipstick ( 1 ) and check the oil level. 2. Add hydraulic oil, if necessary. 3. Fill in hydraulic oil by means of the filler neck. 20.2.9 Air filter x If the respective lamp on the dashboard indicates an accumulation of dirt at the air filter for the combustion air of the Diesel engine, clean or replace the air filter. x After a maximum of five cleanings by means of compressed air, replace the filter cartridge. x Wash the interior of the air filter housing and clean it; if necessary, vacuum it.
Note that the design of the air filter depends on the engine type and that the air filter installed in your compaction roller can differ from the illustration. Fig. 109 Air filter 91 Fig. 108 Hydraulic oil NOTICE Risk of damage to the hydraulic system x In order to check the hydraulic oil level, the compaction roller needs to be parked on level ground. x Be sure to exercise extreme cleanliness when filling in hydraulic oil! x Inform yourself of the type of hydraulic oil in the hydraulic system. Please refer to the table of lubricants for the required specifications. Never mix different types of hydraulic oil!
NOTICE Damage to the Diesel engine Never attempt to clean the air filter housing by blowing air into it.