Komatsu 95-2 DIESEL ENGINE — 23. STARTING MOTOR. ENGINE STOP SOLENOID, FUEL AND OIL FILTERS, DIPSTICK

DISASSEMBLY AND ASSEMBLY OVERALL ASSEMBLY 3) Insert nozzle holder (3) in cylinder head and tighten holder (2). 3 Holder mounting bolt : 44.0 ± 4.9 Nm {4.5 ± 0.5 kgm} 4) Install spill hoses (1). 21. Fuel injection pipe, glow plug 1) Fit glow plug (6) to cylinder head and install lead (5) and wiring connector (4),. 2) Tighten lead (5) and wiring connector (4) with nut of glow plug. 3) Fit fuel injection tube (3) to injection nozzle and install boot (1). fl Before installing the fuel injection pipe, blow with compressed air to clean the inside of the pipe. fl Tighten the sleeve nuts at the fuel injec- tion pump end in the same way. 4) Tighten 2 bracket mounting bolts (2). 3 Sleeve nut :

23.0 ± 2.0 Nm {2.3 ± 0.3 kgm} 22. Water pump 1) Fit gasket to mounting surface and O-ring to pilot portion, then install water pump as- sembly (3). 2) Fit adjustment plate (2) for alternator, and tighten 4 mounting bolts (1). 23. Starting motor, engine stop solenoid, fuel and engine oil filters, dipstick 1) Install engine oil filter (7) to engine block together with tube. 2) Fit fuel filter assembly (6) to intake mani- fold, and install fuel hoses (5) to fuel injec- tion pump. 95-2 SERIES 13-28 13-28 1