MAINTENANCE STANDARD CYLINDER BLOCK CYLINDER BLOCK 6' 1 3 SWE01267 Unit: m m - No Check item Criteria Remedy Standard I Repair limit Replace by grinding 1 0 - 0.08 I 0.1 5 Distortion of cylinder head mounting surface Standard Tolerance Inside diameter of main bearing hole 74 +0.019 0 Repair or replace cylinder block 2 I I Roundness of main bearing hole Repair limit: 0.005 Straightness of main bearing holes Repair limit: 0.010 - I I Standard size I Tolerance I Repair limit STD 70.20 70.00 0.25 U.S. 69.95 69.75 3 Replace main bearing Inside diameter of main bearing 0.50 U.S. 69.50 +O. 103 +0.058 69.70 0.75 U.S.
69.45 69.25 Standard Tolerance Inside diameter of cam bushing hole 53.5 +0.030 0 69.20 69.00 1.00 U.S. Repair or replace cylinder block 4 Journal Tolerance Repair limit Standard Inside diameter of cam bushing Replace 5 50.5 No. 1 +0.030 50.60 -0.040 No. 3 cvlinder block No. 2 Inside diameter of 50.5 -0.031 -0.050 50.60 Press fit bushing 108 - 118 {I1 - 12) 113 {11.5} 1st step bearing cap mounting Tightening torque of main Order Range Nm (kgm1 Target Nm {kgm} 6 bolts (Coat bolt threads and 2nd step 0 {OI Loosen completel) washers with engine oil) 3rd step 132 I13.51 127 - 137 {I3 - 141 Retighten - 14-5 95-2 SERIES