Komatsu 95-2 DIESEL ENGINE — CYLINDER

MAINTENANCE STANDARD CYLINDER CYLINDER SWE01268 Unit: m m )I Check item Criteria Remedy Standard size Repair limit Tolerance STD 95.15 95 Inside diameter 0.25 OS +0.022 95.25 Correct with oversize, or install cylinder liner, or replace cylinder block 95.40 0 95.65 95.50 0.50 OS Roundness of inside diameter Repair limit: 0.020 Cylindricity of inside diameter Repair limit: 0.020 Measure inside diameter at position 40, 100, and 160 from top surface of cylinder block. Use largest value to determine overhaul size. (1) If cylinder bore is less than -95.15: Select 0.25 oversize (When carrying out overhaul) Rank cylin- der bore at top face of cylinder block and correct mark (S or L) 95.25+toZ2 .

piston and machine cylinder bore in cylinder block to (2) If cylinder bore is between 95.16 and 95.40: Select 0.50 oversize piston and machine cylinder bore in cylinder block to 95.50+:.022 . (3) If cylinder bore is more than 95.40: Carry out stepped machining of cylinder block and insert cylinder liner. For details of the method for machining the cylinder block and selecting the cylinder liner, see REBUILDING AND REPLACING. Procedure for overhaul size 14-6 95-2 SERIES