Komatsu 95-2 DIESEL ENGINE — GRINDING CYLINDER HEAD MOUNTING SURFACE

REPAIR AND REPLACEMENT OF PARTS GRINDING CYLINDER HEAD MOUNTING SURFACE GRINDING CYLINDER HEAD MOUNTING SURFACE 1. Grinding . Grind the bottom surface of the cylinder head with a surface grinding machine to remove de- formation or corrosion. Do not exceed the re- pair limit of cylinder head height H. After grind- ing, make an R mark at the rear on the left side (intake side) of the cylinder head. * Standard dimension of cylinder head height H: 90& mm Repair limit: 89.5 mm * Amount to remove per grinding. 0.10 - 0.15 mm * Surface roughness of grinding surface: Within 6s * Flatness (deformation): Within 0.05 mm * Grinding limit: 0.3 mm SWE01281 2.

Check after grinding Check that the insertion depth of the valve is within the standard value. * Insertion depth of valve: Intake side: 1.0 r 0.1 mm Exhaust side: 0.9 r 0.1 mm 15-2 95-2 SERIES