Komatsu 95-2 DIESEL ENGINE — REPLACING VALVE GUIDE

REPAIR AND REPLACEMENT OF PARTS REPLACING VALVE GUIDE REPLACING VALVE GUIDE Special tools No. 1 Valve guide remover 795-100-4710 A Q'ty Part Name Part No. 1 Valve guide remover 795-100-4720 B 1. Removal of valve guide Insert tool A from the top surface of the cylinder head, put it in contact with the valve guide, then hit with a hammer to remove the valve guide. 2. Press fitting valve guide 1) Press fit the valve guide until the tip of tool B contacts the cylinder head. * After press fitting, insert the valve, and if the valve does not enter smoothly, machine the hole with a reamer (08+k0'5 mm) 2) Measure the protrusion of the valve guide and check that it is within the standard range.

* Valve guide protrusion Tolerance: 14.5 5 0.2 mm 95-2 SERIES 15-3