Komatsu 95-2 DIESEL ENGINE — FUEL INJECTION PUMP CALIBRATION DATA

TESTING AND ADJUSTING FUEL INJECTION PUMP CALIBRATION DATA 12-14 2 12-14 95-2 SERIES Injection Pump Assembly Number Applicable Machine Applicable Engine 6204-73-1340 (101495-3411) Model Serial No. Model Serial No. ( ): Injection pump manufacturer’s part No.

PC60-7 58001 and up 4D95LE-2 Injection Injection pump PC75UU-3 19001 and up Pump Type Manufacturer BR100JG-2 1301 and up PES-A BOSCH Injection Pump Specification Engine Specification Rotating direction Clockwise Flywheel horsepower (kW {HP}) / rpm) 42.1{56.5}/2,100 (Gross) Injection order 1 – 2 – 4 – 3 Maximum torque (Nm {kgm}/ rpm) 239{24.4}/1,500 (Gross) Injection interval 90° ± 30’ High idling speed (rpm) 2,250 ± 60 Plunger pre-stroke (mm) 3.2 ± 0.05 Low idling speed (rpm) 1,100+50 +0 rD ee trli av ce tr ioy nv a vl ov le um( emm3/st) 51 Pump tester capacity Motor 7.5 kW for Service standard Calibration Standard ( ):

Injection pump manufacturer’s part number Applicable Machine Applicable Engine Model Serial No. Model Serial No. 60-7 58001 and up 75UU-3 19001 and up 100JG-2 1301 and up 4D95LE-2 Conditions Nozzle & nozzle holder part No. Nozzle part No. ‡ Service standard indicates data Nozzle holder part No. using calibration Injection pipe (mm) test parts. (Outside dia. x inside dia. x length) ‡ Manufacturer Test oil standard is data Oil temperature (°C) for the engine on the machine. Nozzle opening pressure (MPa{kg/cm2}) Transfer pump pressure (kPa{kg/cm2}) Service standard Manufacturer standard Nozzle & nozzle holder part No. (105780-8140) 6204-11-3100 (105118-6700) Nozzle part No.

(105780-0000) 6204-11-3120 (105017-2670) Nozzle holder part No. (105780-2080) 6202-13-3110 (105048-3300) Injection pipe (mm) (Outside dia. x inside dia. x length) 6 x 2 x 600 6 x 1.6 x 600 Test oil ASTM D975 No. 2 diesel fuel or equivalent Oil temperature (°C) 40 – 45 Nozzle opening pressure (MPa{kg/cm2}) 17.2 {175} 19.6 {200} Transfer pump pressure (kPa{kg/cm2}) 157 {1.60} 157 {1.6} Injection volume ‡ Rack positions B to E are the reference volume when adjusting the injection volume. ‡ Marks fl are average volumes.

Rack point Rack Pump position speed (mm) (rpm) Service standard (cc/1000 st.) Manufacturer standard (cc/1000 st.) Maximum Injection variance volume between cylinder Injection volume Maximum variance between cylinder A (Basic point) 10.2 1,050 fl56.0±1 ±2.5 fl48.4 B 10.95 750 fl57.0±2 – fl62.0 C a pprox. 6.6 565 fl8.0±1 ±15 fl8.0 D 100 fl60±5 – fl80 Governor Performance Curve Injection Pump Type Injection pump Manufacturer PES-A BOSCH Rotating direction Clockwise Injection order 1 – 2 – 4 – 3 Injection interval 90° ± 30’ Plunger pre-stroke (mm) 3.2 ± 0.05 Delivery valve (mm3/st) retraction volume 51