Komatsu 95-2 DIESEL ENGINE — FUEL INJECTION PUMP CALIBRATION DATA

TESTING AND ADJUSTING FUEL INJECTION PUMP CALIBRATION DATA 95-2 SERIES 12-15 3 Injection Pump Assembly Number Applicable Machine Applicable Engine 6204-73-1350 (101495-3460) Model Serial No. Model Serial No. ( ): Injection pump manufacturer’s part No.

PC78US-6 4D95LE-2 Injection Injection pump PC78UU-6 Pump Type Manufacturer PES-A BOSCH Injection Pump Specification Engine Specification Rotating direction Clockwise Flywheel horsepower (kW {HP}) / rpm) 41.8{56}/1,850 (Gross) Injection order 1 – 2 – 4 – 3 Maximum torque (Nm {kgm}/ rpm) 229{23.4}/1,500 (Gross) Injection interval 90° ± 30’ High idling speed (rpm) 2,050 ± 50 Plunger pre-stroke (mm) 2.5 ± 0.05 Low idling speed (rpm) 1,150+50 +0 rD ee trli av ce tr ioy nv a vl ov le um( emm3/st) 51 Pump tester capacity Motor 7.5 kW for Service standard Calibration Standard ( ): Injection pump manufacturer’s part number Applicable Machine Applicable Engine odel Serial No. Model Serial No.

-6 U-6 4D95LE-2 Conditions Nozzle & nozzle holder part No. Nozzle part No. ‡ Service standard indicates data Nozzle holder part No. using calibration Injection pipe (mm) test parts. (Outside dia. x inside dia. x length) ‡ Manufacturer Test oil standard is data Oil temperature (°C) for the engine on the machine. Nozzle opening pressure (MPa{kg/cm2}) Transfer pump pressure (kPa{kg/cm2}) Service standard Manufacturer standard Nozzle & nozzle holder part No. (105780-8140) 6205-11-3100 (105118-6690) Nozzle part No. (105780-0000) 6205-11-3120 (105017-2660) Nozzle holder part No. (105780-2080) 6202-13-3110 (105048-3300) Injection pipe (mm) (Outside dia. x inside dia.

x length) 6 x 2 x 600 6 x 1.6 x 600 Test oil ASTM D975 No. 2 diesel fuel or equivalent Oil temperature (°C) 40 – 50 Nozzle opening pressure (MPa{kg/cm2}) 17.2 {175} 19.6 {200} Transfer pump pressure (kPa{kg/cm2}) 157 {1.60} 157 {1.6} Injection volume ‡ Rack positions B to E are the reference volume when adjusting the injection volume. ‡ Marks fl are average volumes. Rack point Rack position (mm) Ser Pump speed Inj (rpm) v vice standard (cc/1000 st.) Manufacturer standard (cc/1000 st.) Maximum ection variance olume between cylinder Injection volume Maximum variance between cylinder A (Basic point) 9.6 925 fl 42.4±1 ±2.5 fl52 B 10.15 750 fl 44.3 – fl62.5 C a pprox.

7.3 590 fl 18±1 ±15 fl18 D – 100 fl 60±5 – fl80 Governor Performance Curve Injection Pump Type Injection pump Manufacturer PES-A BOSCH Flywheel horsepower (kW {HP}) / rpm) 41.8{56}/1,850 (Gross) Maximum torque (Nm {kgm}/ rpm) 229{23.4}/1,500 (Gross) High idling speed (rpm) 2,050 ± 50 Low idling speed (rpm) 1,150+50 +0 Pump tester capacity for Service standard Motor 7.5 kW