Komatsu — (5) Parts inspection and measurement

4. Engine Body @ Crankpin and journal measurement Measure the outside diameter, round- ness and taper at each crankpin and journal. Correct by grinding if unevenly wear, roundness exceeding the limit or insuf- ficient outside diameter is found. Re- place if the defect is excessive. l Crankpin (mm) Crank&n Measuring position of the crankpin and crank journal If the oil clearance exceeds the limit, use an undersized bearing. l Undersized bearing (0.25 mm) Code No.

Standard thickness (mm) 4TNE94.98 129900-23350 1.617-l .625 4TNE106 (T) 123900-23350 2.109-2.117 l Pin machining dimension Pin machining dimension (mm) l Crank journal (mm) If the clearance limit is exceeded, use an undersized bearing. 4-23