4. Engine Body (5.4) Piston Especially clean the combustion sur- I face, circumference, ring grooves and piston pin bosses, and check after re- a ring groove or snap ring groove shall moving any carbon deposit. Any burr at be removed. If crack is suspected, in- 0 spect by color check. Piston outside diameter measurement from the bottom end of the piston of the Measure the long diameter at H mm oval hole in the vertical direction to the piston pin hole.
I l Piston outside diameter Standard Limit Measurement position (H) 4TNE94 93.945-93.955 93.900 22 4TNE98 97.945-97.955 97.900 22 4TNE106 (T) 105.930-l 05.960 105.880 30 if the clearance between piston and cylinder exceeds the limit, use an oversized piston. I Code No. 1 Standard (mm) 1 I 4TNE94 1 129900-22700 I 694.250 I I 4TNE98 129902-22700 I $98.250 I l Oversized piston (0.25 mm) 1 4TNE106 ( 123900-22700 I c$106.250 I 1 4TNE106T / 123901-22700 I $106.250 I l Cylinder boring dimension / Boring dimension (mm) 1 Measure at positions a. b and c in directions A and B. 4TNE94 $94.250~$94.280 4TNE98 @98.250-698.280 a b c 4TNE106 (T) 1 @106.250-$106.280 1 Piston pin outside diameter 4-25