MAINTENANCE * Coolant flushing and changing must be done at least every two years. † For Schedule II and III, the valve lash checking and adjusting must be done first at 60,000 miles and then every M4. ‡ For Schedule II, the REPTO torsional damper checking must be done first at 60,000 miles or 3000 hours and then every 30,000 miles or 1500 hours. Table 18 Required Maintenance Operations Sets, Schedule II and III 68 All information subject to change without notice. (Rev.
04/08) DDC-SVC-MAN-0056 04/08 Copyright © 2008 DETROIT DIESEL CORPORATION Maintenance Operation Description M1 M2 M3 M4 Engine Inspecting — Valve Lash Checking and Adjusting† — — — Fuel /Water Separator Prefilter Element Cleaning — Main Fuel Filter Element Changing — Engine Oil and Filter Changing Coolant Concentration and Inhibitor Level Checking Coolant Flushing and Changing* — — — Cooling System Inspecting — Rear Engine Power Take-Off (REPTO) torsional damper checking‡ — — —