Komatsu — BEFORE STARTING ENGINE

MACHINE OPERATIONS AND CONTROLS OPERATION CHECK ELECTRIC WIRINGS If the fuses frequently blow, if there are traces of short circuits in the electrical wiring, locate the cause immediately and carry out repairs, or contact your Komatsu distributor for repairs. Keep the top surface of the battery clean and check the breather hole in the battery cap. If it is clogged with dirt or dust, wash the battery cap to clean the breather hole. Check for damage, wrong fuse capacity, and any sign of disconnection or short circuit in the electric wiring. Check for loose terminals and tighten any loose parts. In particular check the wiring of the "battery", "starting motor" and "afternator" carefully.

When carrying out walk-around checks or checks before starting, always check if there is any accumulation of flammable material around the battery, and remove it. Please contact your Komatsu distributor for investigation and correction of the cause. CHECK FUNCTION OF HORN 1. Turn the starting switch to the ON position. 2. Confirm that the horn sounds without delay when the horn button is pressed. If the horn does not sound, ask your Komatsu distributor for repair. ADJUST BEFORE OPERATION Adjust the seat position before starting operations or after changing the operator.

Adjust the seat so that the control levers and switches can be operated freely and easily with the operator’s back against the backrest. 132 WARNING WARNING