OPERATION MACHINE OPERATIONS AND CONTROLS SEAT BELT Before fitting the seat belt, check that there is no abnormality in the belt or its mounting bracket. If it is worn or damaged, replace the seat belt. Even if the seat belt appears normal, replace it every 3 years. The date of manufacture of the belt is shown on the back of the belt. Always wear the seat belt during operations. Fit the seat belt so that it is not twisted. FASTENING AND REMOVING SEAT BELT This seat belt has a retractor, so it is not necessary to adjust the length.
Fastening seat belt Hold grip (2) and pull the belt out from the retractor (1), check that the belt is not twisted, then insert tongue (3) into buckle (4) securely. Pull the belt lightly to check that it is properly locked. Removing belt Press button (5) in buckle (4), and remove tongue (3) from the buckle (4). The belt is automatically spooled, hold grip (2) and return the belt slowly to the retractor (1). 135 WARNING