Komatsu — STARTING ENGINE WITH BOOSTER CABLES

OPERATION TROUBLESHOOTING BOOSTER CABLE CONNECTION Keep the starting switch of the normal machine and problem machine at the OFF position. Connect the booster cable as follows, in the order of the num- bers marked in the diagram. 1. Make sure that the starting switches of the normal machine and problem machine are both at the OFF posi- tion. Battery of the normal machine Battery of the problem machine Engine block of the problem machine 2. Connect one clip of booster cable (A) to the positive (+) terminal of the problem machine. 3. Connect the other clip of booster cable (A) to the positive (+) terminal of the normal machine. 4.

Connect one clip of booster cable (B) to the negative (-) terminal of the normal machine. 5. Connect the other clip of booster cable (B) to the upper structure of the problem machine. STARTING THE ENGINE CAUTION Always check that the safety lock lever is set to the LOCK position, regardless of whether the machine is working normally or has failed. Also check that all the control levers are at the HOLD or neutral position. 1. Make sure the clips are firmly connected to the battery terminals. 2. Start the engine of the normal machine and keep it to running at high idling speed. 3. Turn the starting switch of the problem machine to the START position and start the engine.

If the engine doesn't start at first, try again after 2 minutes or so. BOOSTER CABLE DISCONNECTION After the engine has started, disconnect the booster cables in the reverse order in which they were connected. 1. Remove one clip of booster cable (B) from the upper structure of the problem machine. 2. Remove the other clip of booster cable (B) from the nega- tive (-) terminal of the normal machine. Battery of the normal machine Battery of the problem machine 3. Remove one clip of booster cable (A) from the positive (+) terminal of the normal machine. Engine block of the problem machine 4. Remove the other clip of booster cable (A) from the posi- tive (+) terminal of the problem machine. 197