Komatsu — PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS

MAINTENANCE USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS For HO46-HM, use the oil recommended by komatsu. REMARK When fuel sulphur content is less than 0.5%, change oil in the oil pan at the periodic maintenance hours described in this manual. Change oil according to the following table if fuel sulphur content is above 0.5%.

217 RESERVOIR KIND OF FLUID AMBIENT TEMPERATURE °C Type of oil Capacity Min Temp Max Temp Specified Refil Engine oil pan Engine oil 0° C -20° C -20° C -15° C 40° C 10° C 50° C 50° C SAE 30 CD SAE 10W SAE 10W-30 SAE 15W-40 38 liters 35 liters Swing machin- ery case -20° C 40° C SAE 30 13.4 liters 13.4 liters Final drive case (each) -20° C 40° C SAE 30 8.5 liters 8.5 liters Damper case -20° C 40° C SAE 30 0.75 liter - Hydraulic sys- tem -20° C -20° C -20° C -20° C 40° C 40° C 40° C 40° C SAE 10W SAE 10W-30 SAE 15W-40 Bio degradable hyd.

oil (Hees) ISO 46 365 liters 188 liters Hydraulic oil -20 40° C HO46-HM Fuel tank Diesel fuel - 6° C -20° C ASTM D975 N° 2 ASTM N° 1 for winter 605 Liters - Cooling system Water -30° C Add antifreeze 32 liters - Fuel sulphur content Change interval of oil in engine oil pan 0.5 to 1.0% 1/2 of regular interval Above 1.0% 1/4 of regular interval