Komatsu — REPLACING ADDITIONAL FILTER ELEMENT FOR BREAKER

MAINTENANCE MAINTENANCE SCHEDULE MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER For machine equipped with a hydraulic breaker, the hydraulic oil deteriorates faster than for normal bucket digging operations, so set the maintenance intervals as follows. REPLACING HYDRAULIC ELEMENT On new machines, replace the element after the first 100 to 150 hours, then carry out further replacement of the ele- ment according to the table on the right. CHANGING OIL IN HYDRAULIC TANK Replacement interval (h) Change the oil according to the table on the right.

Replacement interval for hydraulic oil REPLACING ADDITIONAL FILTER ELE- MENT FOR BREAKER Use a guideline of 250 hours for use of the breaker (operat- ing ratio for the breaker: 50 % or more), and replace the element according to the table on the right. Hydraulic filter element (When not using breaker) Breaker operating ratio (%) (When using breaker only) Additional filter element 225