Komatsu — INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)

MAINTENANCE MAINTENANCE PROCEDURE REPLACE BUCKET TEETH Replace the point before the adapter starts to wear. Free take when the teeth are being replaced. Set the work equipment in a stable position, then stop the engine and apply the locks securely to the levers. Lock If the locking pin is knocked out with excessive force, there is a hazard that the pin may fly out. Check that there is no one in the surrounding area. Pieces will often fly during the replacement operation, so wear safety glasses, gloves, and other protective equipment. NOTICE Please confirm with your bucket supplier for the correct procedure to replace bucket teeth and side cutters.

ADJUST BUCKET CLEARANCE It is dangerous if the work equipment moves by mistake when the clearance is being adjusted. Set the work equipment in a stable position, then stop the engine and lock the safety lock lever securely. Free Lock 239 WARNING WARNING