ATTACHMENTS AND OPTIONS MACHINES READY FOR ATTACHMENTS When the front of the pedal is depressed, oil flows to the piping on the left side of the work equipment; when the rear of the pedal is depressed, oil flows to the piping on the right side of the work equipment. (When a breaker is installed, only the front of the pedal can be used.) REPLACE ADDITIONAL BREAKER FILTER ELEMENT Immediately after operating the engine, all parts still retain high temperature. Never replace the filter in such condi- tion. Replace it only after each part has sufficiently cooled. Prepare a container for draining off oil. 1. Place the container under the filter element. 2.
Turn filter case (1) counterclockwise to remove it. Remove element (2) from the case. 9JH02685A 3. Unscrew plug (3) from filter case (1). 4. Clean the removed parts. Mount a new element (2) and O-ring (4). 5. After the case reaches the filter holder, additionally tighten the case by more than a 1/2 turn. NOTICE For the element replacement interval, see "MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER (PAGE 225)". 291 WARNING