Komatsu — SPECIFICATIONS

MACHINES READY FOR ATTACHMENTS ATTACHMENTS AND OPTIONS LONG-TERM STORAGE If the equipment is not to be used for a long period, do as follows. Set the stop valve to the LOCK position. Install the blind plugs and O-rings to the valves. Set the selector valve to the "when not use" position. Lock the lock pin in the lock position. If the pedal is operated when there is no breaker or general attachment installed, it will cause overheating and other problems. SPECIFICATIONS Hydraulic specifications Max.

merging oil flow 270Ч2 liters / min Safety valve of service valve Relief setting pressure 21.60 MPa (220 kgf / cmІ) (except B mode) Safety valve of service valve Cracking pressure 24.53 MPa (250 kgf / cmІ) (except B mode) Safety valve of service valve Relief setting pressure 17.20 MPa (175 kgf / cmІ) (B mode) Safety valve of service valve Cracking pressure 20.10 MPa (205 kgf / cmІ) (B mode) In addition to the valves listed above, a safety valve with relief setting pressure of 21.60 MPa (220kgf / cmІ) and a safety valve with cracking pressure of 17.20 MPa (175 kgf / cmІ) are available. Consult the Komatsu distributor in the territory. 296