ATTACHMENT GUIDE ATTACHMENTS AND OPTIONS SELECTION OF BUCKET TEETH Depending on the working conditions, there is danger that an adapter or tooth may break, so select from the verti- cal pin or horizontal pin teeth to get teeth that are suitable for the purpose. While the standard teeth of both vertical and horizontal pin types may be used widely, the following kinds of teeth are recommended depending on the working conditions. METHOD OF SELECTING TEETH Use of vertical pin teeth General digging: Digging and loading normal soil, such as sand, gravel, clay, etc. Light-duty digging: digging and loading dry and loose sandy soil, or muddy soil Loading:
loading of dry and loose earth Use of horizontal pin teeth Heavy-duty digging: digging hard soil, soil with rocks involving hammering work, scraping and the like The heavy-duty bucket is of a horizontal pin type and as such, use it for heavy duty-digging. Use of long-life teeth Jobsites where long wear life is demanded, such as when loading hard rocks.
Jobsites where no penetration is needed, such as when working with crushed rocks after blasting or ripping Jobsites where heavy-duty operations are carried out, such as hitting or pulling up rocks with the tips of the teeth Self-sharpening teeth (both vertical pin type and horizontal pin type) Jobsites demanding penetration such as digging and loading sandy or clayey soil STANDARDS FOR SELECTING VERTICAL PIN TYPE AND HORIZONTAL PIN TYPE TEETH 300 Applicable Work Site Rock Crushed stone Clayey soil, Decompressed weathered granite Sand Work Contents Heavy Light ← → Digging with hammering work Horizontal pin type teeth Horizontal pin type teeth Vertical pin type teeth Scraping down Horizontal pin type teeth Horizontal pin type teeth Vertical pin type teeth General excavation Horizontal pin type teeth Vertical pin type teeth Loading Horizontal pin type teeth Vertical pin type teeth