Komatsu — ELECTROMAGNETIC INTERFERENCE

SAFETY INFORMATION SAFETY VENTILATION FOR ENCLOSED AREA If it is necessary to start the engine within an enclosed area, or when handling fuel, flushing oil, or paint, open the doors and windows to ensure that adequate ventilation is provided to pre- vent gas poisoning. SIGNALMAN'S SIGNAL AND SIGNS Set up signs to inform of road shoulders and soft ground. If the visibility is not good, position a signalman if necessary. Operators should pay careful attention to the signs and fol- low the instructions from the signalman. Only one signalman should give signals. Make sure that all workers understand the meaning of all signals and signs before starting work.

EMERGENCY EXIT FROM OPERATOR'S CAB If it becomes impossible to open the cab door for any rea- son, open the rear window and use it as an emergency escape. For details, see "EMERGENCY EXIT FROM OPERATOR'S CAB (PAGE 103)" in this manual. ELECTROMAGNETIC INTERFERENCE When this machine is operating close to a source of high elec- tromagnetic interference, such as a radar station, some abnor- mal phenomena may be observed. The display on the monitor panel may behave erratically. The warning buzzer may sound. These effects do not signify a malfunction and the machine will return to normal as soon as the source of interference is removed. 34