Komatsu — BASIC CHECK ITEMS

OPERATION EXPLANATION OF COMPONENTS CAUTION ITEMS CAUTION If the warning monitor lights up red, stop operations as soon as possible and carry out inspection and maintenance at the applicable location. If the warning is ignored, it may lead to failure. These are items that should be observed while the engine is running. If any abnormality occurs, the screen dis- plays the item that needs immediate action. If there is an abnormality, the monitor for the abnormal location lights up red. 3 1 2 4 5 6 CHARGE MONITOR This monitor (1) warns the operator that there is an abnormality in the charging system when the engine is running.

If the bat- tery is not being charged properly while the engine is running, it lights up red. If it lights up red, check for looseness of the V-belt. If any abnormality is found, take the necessary action. For details, see "OTHER TROUBLE (PAGE 198)". REMARK While the starting switch is ON, the lamp will remain lit and will go off once the engine is started. When the engine is started or stopped with the starting switch at the ON position, the lamp may light up and the buzzer may sound momentarily, but this does not indicate any abnormality.

67 (1) Charge level monitor (4) Engine water temperature monitor (2) Fuel level monitor (5) Hydraulic oil temperature monitor (3) Air cleaner clogging monitor (6) Overload caution monitor