EXPLANATION OF COMPONENTS OPERATION METER DISPLAY PORTION PILOT DISPLAY When the starting switch is ON, the pilot display lights up when the display items are functioning. ENGINE PRE-HEATING MONITOR This monitor lamp (1) indicates the pre-heating time required when starting the engine at an ambient temperature below 0°C. The monitor lamp lights when the starting switch is turned to the HEAT position and flashes after about 30 seconds to show that the pre-heating is completed.
(The monitor lamp will go off after about 10 seconds.) 72 (1) Engine Pre-heating Monitor (7) One touch power up monitor (2) Swing Lock Monitor (8) Engine water temperature gauge (3) Wiper monitor (9) Fuel Gauge (4) Auto-deceleration monitor (10 )Hydraulic oil temperature gauge (5) Working mode monitor (11) Service Meter (6) Travel speed monitor