EXPLANATION OF COMPONENTS OPERATION MACHINE PUSH-UP SWITCH This switch (7) is used to switch the safety valve set pressure at the head end of the boom cylinder between two levels. (a) Low pressure setting: The boom thrust force is weak, so the swaying of the chassis is small during digging operations, and dig- ging operations can be carried out smoothly. This is used for general digging operations on normal ground, soft rock, or blasted rock. (b) High pressure setting: The thrusting force of the boom becomes more powerful, so it is easy to twist and swing or escape from soft ground.
b a 9JM00613A HORN SWITCH When the button (8) the top left hand button on the right work equipment control lever is pressed, the horn will sound. Two spare buttons are for the installation of additional features, con- tact local distributor for enquiries. KNOB SWITCH Knob switch (9) the top right hand button on the left work equip- ment control lever is used to actuate the power max and slow- down functions. Press once (single click) and keep the switch pressed. The one-touch power max. function is actuated for a maximum of 8.5 seconds in A and E mode. Two spare buttons are for the installation of additional features, contact local distributor for enquiries. 90