Komatsu — CONTROL LEVERS, PEDALS

EXPLANATION OF COMPONENTS OPERATION CONTROL LEVERS, PEDALS 9JH02394A SAFETY LOCK LEVER When leaving the operator's compartment, set the safety lock lever securely to the LOCK position. If the safety lock lever is not at the LOCK position and the control levers are touched by mistake, it may lead to serious personal injury. If the safety lock lever is not placed securely at the LOCK position, the control lever may move and cause a serious accident or injury. Check that the condition of the lever is as shown in the diagram. When pulling the safety lock lever up, be careful not to touch the work equipment control lever.

When pushing the safety lock lever down, be careful not to touch the work equipment control lever. Lever (1) is a device, which locks the work, swing, and travel equipment, and attachment (if equipped) control levers. Pull the lever up to apply the lock. Free This lock lever is a hydraulic lock, so even if it is in the lock position, the work equipment control lever and travel lever will move, but the work equipment, travel motor, and swing motor will not work. Lock 94 (1) Safety lock lever (3) Left work equipment control lever (2) Travel levers (Machines with travel pedal) (4) Right work equipment control lever WARNING