. OPERATION OPERATION ADJUST SEAT BELT Always wear the seat belt. WARNING 3 - 76 (G) Adjusting h Move the head Amount of adju stment: 50 mm (2.0 i (H) Adjusting h eadrest angle Rotate the hea drest (6) to the front Adjustment ran ge: 60 degrees (I) Adjusting ar mrest angle n be operated by hand to spring up approx. 90 left and right). Armrest (7) ca degrees (both In addition, dia l (8) under the armre st can be operated by hand to make fine adju stments of the armrest in the up or down direction (left side only). Adjustment ran ge:
forward tilt 25 de grees, backward ti lt 5 degrees Before fasteni ng the seat belt, check t hat there is no abnor mality in th e belt-mounting bra cket or mounting of th e belt. If the belt is worn or da maged, replace it. perations. ations. are not twisted when fastening the seat belt. Fasten the se at belt before starting o Always wear t he seat belt during oper Make sure tha t the left and right belts are not twisted whe n fastenin g the FASTENING AND REMOVING BELT Fastening seat belt Fastening seat b Hold grip (2) an d pull the belt out from wind-in device (1) , check t hat the belt is no securely. When doing th locked.
t twisted, then insert tongue (3) into buckle (4) is, pull the belt lightly to check that it is properly (4) Removing belt Press button ( 5) in buckle (4), and r emove tongue (3) from buckle (4). The belt is aut omatically wound in, so hold grip (2) an d return t he belt slowly to w ind-in device (1).