. OPERATION OPERATION (H) Adjusting headrest angle Rotate the headrest (6) to the front or rear. Adjustment range: 60 degrees Amount of adjustment: 50 mm (2.0 in) (D) Setting seat for weight (E) Adjusting reclining angle Move lever (4) up and move the backrest to the front or rear. Adjustment range: Front 24 degrees , Rear 3 degrees \i (F) Lumbar support Turn grip (5) to adjust the tension applied to the lower back. 3 - 75 (I) Adjusting armrest angle ted by hand to spring up approx. 90 ). Armrest (7) can be opera degrees (both left and right In addition, dial (8) under th e armrest can be operated by han d to make fine adjustments of t (left side only).
he armrest in the up or down direction Adjustment range: forward tilt 25 degrees, backward tilt 5 degrees AIR SUSPENSION SEAT t (A) Fore-and-aft adjustmen Pull lever (1) up, set the se at to the desired position, then release the lever. 20 mm (4.7 in) Fore-and-aft adjustment: 1 (B) Adjusting seat angle h down on the rear of the seat to tilt it Move lever (2) up and pus backward. Move lever (2) down and p ush down on the front of the seat t o tilt it forward. ees (Tilt forward/tilt back angle) Adjustment range: 13 degr (C) Adjusting height of seat Move lever (2) up or down t o move the seat up or down. This lever is also used to adjust the height.
Knob (3) controls the air s pull the knob to adjust the s uspension's strength and compensate for operator weight and/or preference.