. MAINTENANCE GUIDES TO MAINTENANCE CHECK SERVICE METER: meter reading every day to see if the time has come for any necessary maintenance to be KOMATSU GENUINE OILS: Use Komatsu genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. 4 - 2 GUIDES TO MAINTENANCE Do no t perform any inspection a nd maintenance oper ation tha t is not foun Check the servi perfor KOMATSU GENUINE REPLACEMEN T PARTS: Use K omatsu ge nuine parts spe cified in the Parts Bo ok as replacement p ALWAYS USE CLEAN WASHER FLU ID: Use a utomobile window washer fluid, and be careful not to let any dirt get ALWAYS USE CLEAN OIL AND GRE ASE: Use cl ean oil an d grease.
Also, keep the containers o f the oil a nd grease clean. Keep foreign materials away from oil and grease. CHECKING FOR FOREIGN MATERIALS IN DRAINED OIL AND ON FILTERS: After o il is chang ed or filters are r eplaced, check the old oil and fi lters for met al particles and for eign materials . If l arge quanti ty of meta l particles or foreign materials are found, always report to the person in charge, and carry out harge, an arry suitab le action. FUEL STRAINER: Do no t remove t he strainer from the filler port when a dding fue WELDING INSTRUCTIONS: witch. V continuously. hin 1 m (3.3 ft) of the area to be welded. If grounding cable is connected near , the instruments may malfunction.
Tur n off the e ngine starting s Do not apply more than 200 Con nect grounding cable wit hin 1 m (3.3 inst ruments, c onnectors, etc. , the instruments may malfunction. If a seal or be aring happens t o come between the p art being welded an d grounding point, change the grounding poi nt to avoid such parts. he work equipment pins or the hydraulic cylinders as the grounding point. Do not use th e area around t he work equipment pi ns or the hydraulic c ylinders as the gro unding point. DO NOT DROP THINGS INSIDE MAC HINE: Wh en openin g inspection win dows or the oil filler p ort of the tank to ca rry out inspection, be careful not to drop nut If su lea s, bolts, or tools inside the machine.
ch things are dropped ins ide the machine, it ma y cause damage an d/or malfunction of the machine, an d will d to failure . If you drop an ything inside the mac hine, always remove it immediately. r inspection. Do not put un necessary thing s in your pockets. C arry only things whic h are necessary fo