Komatsu — CHECK AXLE OIL LEVEL, ADD OIL

. MAINTENANCE SERVICE PROCEDURE CHECK AXLE OIL LEVEL, ADD OIL WARNING operation. REMARK Remove the mud and dirt from around plug (1), then remove the plug. 2. With cloth, wipe off any oil adhering to the oil level gauge attached to plug (1). 4 - 24 When checking the oil level, apply the parking bra ke and secure the front and rear frames with th After stopping the e ngine, the parts and oil are at a high temperature . W ait for the temperature to go down before starting the Perform this proced ure if there is any sign of oil on the axle case. Inspect the machine on a horizontal surface. (If the road surface i s at an angle, the oil level c annot be checked A: Front B: Rea 1.

Stop the engine and remove oil level plug ( 3. Set the oil level gauge (G) as shown in the right diagram . 4. The oil level is co rrect when it is between the two lines provided on the oil level g If the oil level doe port (F). 5. If the oil level is auge. s not reach the lower line, add oil through filler above the upper line, drain off the excess oil oil through drain pl ug (P) and check the oil lev 6. If the oil level is Tightening torqu