. OPERATION EXPLANATION OF COMPONENTS STARTING SWITCH This switch (1) is used to start or stop the engine. OFF position key. All the electric system switches are off, and the engine will stop. SPEED RANGE SELECTOR SWITCH Use this switch (2) to switch the speed range. Use 1st and 2nd for operations, and 3rd and 4th for travel. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th 3 - 32 In this position, it is possibl e to insert or remove the starting switc ON position rent flows to the charging circuit, lam it. In this position, electric cur circuit, and accessory circu Keep the starting switch ke y at the ON position while the engine running.
START position This is the position to start the engine. Hold the key at this position whil e cranking. Rele ase the key imm ediately after the engine has been started. The key will return to th e ON position when released. REMARK When traveling at high spe ed in 3rd or 4th (travel speed: 10 k m/h (6.2 MPH ) or more), even if the transmissio n speed is shifted to 1st or 2nd, the motor overrun prevention system will p revent t he transmission f rom shifting to 1s t or 2nd. In this case, the central w arning lamp will light and the a larm buzzer will sound.
At th "Overrun prevention" are d isplayed on the character displa y in t urn for 3 The following methods can be used to cancel the alarm buzzer. Reduce speed so that t he travel speed is 9 km/h (5.6 MPH) o r less. If the actual spee d range is 1st or 2nd, the alarm buzzer is cancele d. tor switch to 3rd or 4th. Return the speed selec