. OPERATION EXPLANATION OF COMPONENTS DIRECTIONAL SELECTOR SWITCH This switch (4) is used to switch the direction of travel of the machine between forward and reverse. F Position: FORWARD N Position: Neutral R Position: REVERSE Before operating this switch, check that the condition is as follows. Directional lever is at N Directional selector switch actuation switch is at ON If the condition is not as above, the switch will not work. For details, see "CHANGING DIRECTION (PAGE 3-87)". DIRECTIONAL SELECTOR SWITCH ACTUATION SWITCH When this switch (5) is turned on, the directional selector switch is actuated. Position (a): ON The directional selector switch is actuated. Position (b):
OFF The directional selector switch is turned off. REMARK Turn this switch ON when the directional lever and directional selector switch are at the neutral position. At any other position, this switch does not work. Even if the directional selector switch is functioning, when the directional lever is operated, the operation of the directional lever is given priority. 3 - 33 VARIABLE SHIFT CONTROL SWITCH Whe n the speed r ange is in 1st, it is possible to use this dial (3) set t he maximum speed a s desired. Turn the dial to th e right t o increase the setting; turn it to the left decrease the setting.
The conditions for use m ay diffe r according to t he condition of t he road surface Installed tire Max. speed [km/h (MPH)] Standard tire (20.5-25) 4.0 - 13.0 (2.5 - 8.1) Small diameter tire (17.5-25) 3.6 - 11.7 (2.2 - 7.3)