N5A0132E N5A0136E Legend 1. Adjuster gear 3) Remove the clip (2) and loosen the hose end (3) from the pipe to remove the flexible hose. Notice: Take care not to twist the piping and the flexible hose. 5. Turn the adjuster gear to the marked arrow “LOOSE” on the backing plate. N5A0137E N5A0133E 9. Wheel Cylinder Assembly 10. Back Plate and Oil Shield Cover Store all of the removed parts in a clean part tray. 6. Shoe Holding Spring, Cup and Pin 7. Brake Shoe and Return Spring 8. Brake flexible Hose and Pipe 1) Place a tray beneath the flexible hose to re- ceive the brake fluid. 2) Loosen the union nut (1).
Inspection and Repair Make the necessary adjustments, repairs, and part re- placements if excessive wear or damage is discovered during inspection. Brake Drum Inside Diameter Visually inspect the brake drum for excessive wear and scoring. If the brake drum is scored or worn, lathed to the speci- fied limit. Use a vernier caliper to measure the brake drum inside diameter.