Notice: Be sure to push up the auto-adjuster lever (Step 2). Failure to do so will result in damage to the teeth of the auto-adjuster lever. Take care not to damage the rubber boot with the bar or the screwdriver. N5A0128E Legend 1. Corroded portion Drum Inside Diameter 260 mm 1. Remove the rubber covers from the brake lining clearance adjusting hole and auto-adjuster lever release hole. 2. Push up the auto-adjuster lever with a long drift or a suitable rod. (Outside diameter: 4 mm (0.15 in) length: 80 mm (3.1 in)) N5A0156E Legend 1. Adjuster 2. Screw driver 3. Rod Drum Inside Diameter 320 mm 1.
Remove the rubber cover from the brake lining clearance adjusting hole and auto-adjuster lever release hole. 2. Remove the adjust hole cover and adjuster lever release hole cover. N5A0155E Legend 1. Auto-adjuster lever 2. Rod 3. Hold the auto-adjuster lever stationary. Use a screwdriver to rotate adjusters at back of the brake to provide clearance between lining and drum. N5A0129E