Legend 1. Adjuster lever release hole cover 2. Adjuster hole cover 3. Using φ 5 mm Phillips screwdriver put it into the ad- juster lever release hole and then push up the ad- juster lever. N5A0132E Legend 1. Adjuster gear 5. Turn the adjuster gear to the marked arrow “LOOSE” on the backing plate. N5A0130E Legend 1. Adjuster lever release hole N5A0133E Drum Inside Diameter 240 mm 1. Remove the rubber cover from the brake lining clearance adjusting hole/auto-adjuster lever re- lease hole in the back plate. 2. Insert a thin, suitable rod in the hole, and push up the auto-adjuster lever (4). 3.
With the auto-adjuster lever (4) pushed up, insert a keystone tip screwdriver in the adjusting hole, and turn the adjuster gear (1) to increase the gap be- tween the gear and the brake shoe (the outside di- ameter of the shoe will decrease). 4. Put the flathead screwdriver into the adjuster hole while push up the adjuster lever. N5A0131E