Isuzu — Isuzu N Series Training Manual

Windshield Washer Motor Installation To install, follow the removal steps in the reverse order. Inspection With the battery (+) terminal connected to the washer motor connector terminal 1 and the ( ) terminal to the connector 2 , check to see if the cleaning fluid pushes out. Replace the tank/motor when the result of inspection is found abnormal. B-8 B-8 1 2 B-8 N8A0265E Removal Preparation: Disconnect the battery ground cable. 1. Instrument Panel Under Cover Refer to “INSTRUMENT PANEL” of section 2. 2. Washer Tank 1) Disconnect the washer motor connector. 2) Disconnect the washer hose. 3) Remove three fixing screws. 3. Clip Band 4.

Windshield Washer Motor Hold the motor and pull it out from the washer tank. 3 4 2 1 N8A0266E