Isuzu — Isuzu N Series Training Manual

N5A0142E N5A0173E 4. Correct any areas having poor contact with sand- paper. 5. Repeat Steps 1 through 4 until the contact between the brake lining and the brake drum is perfect. 2. Wheel Cylinder Assembly Tighten the wheel cylinder assembly bolts to the specified torque. Installation 1. Back Plate Tighten the back plate bolts to the specified torque. * Single Tire models ** Dual Tire models N5A0146E Wheel Cylinder Assembly Bolt Torque N⋅m (kg⋅m/lb⋅ft) Drum Inside Dia.

mm (in) Lining Width mm (in) — 228.6 (9.00) 75 (2.95) 34 (3.5/25) 240.0 (9.45) 60 (2.36) 25 (2.5/18) 260.0 (10.24) 90 (3.54) 43 (4.4/32) 279.4 (11.00) 60 (2.36) 27 (2.8/20) 290.0 (11.42) 75 (2.95) 25 (2.5/18) 300.0 (11.81) 75 (2.95) 34 (3.5/25) 320.0 (12.60) 75 (2.95) 43 (4.4/32) 100 (3.94) 74 (7.5/55) 120 (4.72) 94 (9.6/69) Back Plate Bolt Torque N⋅m (kg⋅m/lb⋅ft) Drum Inside Dia.

mm (in) Lining Width mm (in) — 228.6 (9.00) 75 (2.95) 108 (11.0/80) 240.0 (9.45) 60 (2.36) 108 (11.0/80) 260.0 (10.24) 90 (3.54) 108 (11.0/80) 279.4 (11.00) 60 (2.36) 74 (7.5/54) 290.0 (11.42) 75 (2.95) 108 (11.0/80) 300.0 (11.81) 75 (2.95) * 44 (4.5/33) ** 108 (11.0/80) 320.0 (12.60) 75 (2.95) 108 (11.0/80) 100 (3.94) 108 (11.0/80) 120 (4.72) 157 (16.0/116)