Remove bolts and nuts: support bracket to floor. Remove bolts: steering column bracket to in- strument reinforcement assembly. Remove bolts: steering column bracket to brake pedal bracket. N5A0208E Installation 1. Brake Pedal Assembly with Master Cylinder and Hydraulic Booster Set ATF inlet pipe and install brake pedal as- sembly. N5A0207E Tighten: M10 mounting bolts to 42 N m (4.3 kg m / 32 lb ft) 6. ATF pipe: inlet and outlet. Disconnect pipes from the booster. 7. Brake pipe and hose: front and rear. Connect ATF inlet pipe with flexible hose. Install accelerator pedal bracket. Disconnect pipes and hoses from the brake master cylinder. 8.
Brake pedal assembly with master cylinder and hy- draulic booster. Install radiator grille. Remove accelerator pedal bracket. Remove brake pedal assembly mounting bolts. Remove radiator grille and disconnect ATF in- let pipe from flexible hose in front of the radia- tor. Remove ATF inlet pipe. Remove brake pedal assembly.